1
LINE OUT level knob
Controls the
output level of the
LINE OUT
jacks.
2
PHONES LEVEL knob
Controls the
output level of the
PHONES
jack.
3
MIDI IN indicator
Lights when MIDI
data is being received at the
MIDI IN
con
-
nector.
MIDI OUT indicator
Lights when MIDI
data is being transmitted from the
MIDI
OUT
connector.
4
USB indicator
Lights to indicate a
valid USB connection to the host comput
-
er.
5
MON MIX balance knob
Controls
the balance of the signal sources being out
-
put from the
LINE OUT
jacks and the
PHONES
jack. When this knob is turned to
the far left, the signal being input to the
US-144 (from the XLR jacks, or 1/4" phone
jacks) will be output. When this knob is
turned to the far right, the output signal
received from the computer via USB will
be output.
6
MONO switch
Turn this switch
ON
if
you want to monitor in monaural. This
switch affects only the analog input signal.
7
INPUT knobs (L, R)
Adjust the level
of the audio signal being input to the
MIC
IN
jacks and
LINE IN
jacks
TASCAM
US-144
11
3
–
Installation
Installing the drivers
In order to use the US-144, you must install
the appropriate drivers into your computer.
As described below, this is an easy process
using the CD-ROM included with the
US-144.
Drivers are updated from time to time. You
can download the most recent version of
the drivers from the TASCAM website
Do not connect the US-144 to your com
put
-
er before you have installed the drivers.
No comments:
Post a Comment